Installation [12/2023 - ]: Procedure
- INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
- INSTALL NO. 2 INSTRUMENT PANEL WIRE
- Attach the clamp to install the No. 2 instrument panel wire.
- Connect the 3 airbag connectors.NOTE:
- When connecting any airbag connector, take care not to damage the airbag wire harness.
- Make sure the lock button is securely locked.
- Be sure to connect the connectors to each corresponding color.
HINT:
Refer to How to Connect or Disconnect Airbag Connector: Refer to HOW TO CONNECT OR DISCONNECT AIRBAG CONNECTOR [12/2023 - ]
- INSTALL NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY
- INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
Refer to INSTALLATION [12/2023 - ]
- CHECK SRS WARNING LIGHT
Refer to OPERATION CHECK [12/2023 - ]
