DTC C0558-95: Right Rear Wheel Speed Sensor Incorrect Component Installed [12/2023 - ]: Procedure

1. Check that the rear speed sensor RH is installed.

   OK

   Proper rear speed sensor RH is installed.

   NOTE:

   If it is necessary to remove components in order to check the rear speed sensor RH, follow the relevant installation and removal procedures and precautions for those components.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

REPLACE REAR SPEED SENSOR RH. Refer to  REMOVAL [12/2023 - ] 

Result: 

OK 

See step  2

Pre-procedure1

1. None

   Procedure1

2. Clear the DTCs.

   Chassis > Brake/EPB > Clear DTCs 

   Result

   Proceed to
   NEXT

   Post-procedure1

3. Turn the ignition switch off.

Result: 

NEXT 

See step  3

Pre-procedure1

1. Based on the Freeze Frame Data and interview with the customer, attempt to reproduce the conditions when the malfunction occurred.

   Procedure1

2. Check if the same DTC is output.

   Chassis > Brake/EPB > Trouble Codes 

   Result

   Result	Proceed to
   C0558-95 is not output	A
   C0558-95 is output	B

   Post-procedure1

3. None

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2023 - ] 

Result: 

B 

REPLACE REAR SPEED SENSOR RH. Refer to  REMOVAL [12/2023 - ]