Installation [12/2023 - ]: Procedure

1. Fig 1: Back Window Lock Assembly Bolts Tightening Sequence

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   MP grease

   -

   -

   1. Apply MP grease to the sliding parts of the back window lock assembly.
   2. Attach the guide and clip, install the back window lock assembly.
   3. Install the 3 bolts in the order shown in the illustration.

      Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

   4. Connect the connector.

Refer to INSTALLATION [12/2023 - ]