Removal [12/2023 - ]: Procedure
- REMOVE FRONT DOOR UPPER TRIM COVER LH
Refer to PROCEDURE - Step 3 - REMOVE DOOR ARMREST COVER SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 4 - REMOVE COURTESY LIGHT ASSEMBLY
Refer to PROCEDURE - Step 1 - REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 6
- REMOVE OUTER MIRROR INSTALL HOLE COVER LH
Refer to PROCEDURE - Step 13
- REMOVE HOLE PLUG
Refer to PROCEDURE - Step 14
- REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH
*A w/ Panoramic View Monitor System *B w/o Panoramic View Monitor System - w/ Panoramic View Monitor System:
1. Disconnect the 3 connectors and detach the wire harness clamp.
- w/o Panoramic View Monitor System:
1. Disconnect the connector and detach the wire harness clamp.
- w/ Panoramic View Monitor System:
- Remove the 3 nuts.NOTE:
Hold the outer rear view mirror assembly LH with one hand so that it does not drop.
- Detach the claw and guide to remove the outer rear view mirror assembly LH.
- Remove the 3 nuts.