LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> GX 550 Overtrail >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Panels / Trim - Service Information (2 Of 2) >> Front Fender >> Disassembly [12/2023 - ] >> Procedure

Disassembly [12/2023 - ]: Procedure

  1. REMOVE HEADLIGHT ASSEMBLY LH 

    Refer to REMOVAL [12/2023 - ]

  2. REMOVE WHEEL ASSEMBLY 

    Refer to REMOVAL [12/2023 - ]

  3. REMOVE FRONT FENDER TOP REINFORCEMENT SUB-ASSEMBLY LH 
    1. GTY1218755Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
  4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH 

    See step  1

  5. REMOVE FRONT FENDER NO. 2 TO COWL SIDE SEAL LH 

    See step  2

  6. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH 

    Refer to REMOVAL [12/2023 - ] 

  7. REMOVE FRONT FENDER LINER LH 
    1. GTY1215854Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Fold Back Clip
      Screw Grommet
  8. REMOVE FRONT FENDER SIDE PANEL PROTECTOR LH 
    1. GTY1211436Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
  9. REMOVE FRONT FENDER PANEL LH 
    1. GTY1212548Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Put protective tape around the front fender panel LH.
      2. Remove the 10 bolts and front fender panel LH.
  10. REMOVE FRONT SIDE NO. 2 AIR GUIDE 
    GTY1213207Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals