LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> GX 550 Overtrail >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim - Service Information (2 Of 2) >> Rear Door Window Frame Moulding >> Removal [12/2023 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the rear door window frame moulding LH (center pillar side) removal/installation are shown below.

NECESSARY PROCEDURES AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function when Necessary Procedures are not Performed Link
  • Rear door glass sub-assembly LH
  • Rear door glass sub-assembly RH
  • Rear door glass run LH
  • Rear door glass run RH
Initialize power window control system
  • Auto up and down function
  • Jam protection function
  • Catch protection function
  • Remote control function
  • Key-linked function
  • Wireless transmitter-linked function
  • Key-off operation function
  • Window open warning function
Refer to REGISTRATION [12/2023 - ]

HINT: 



LEMON Manuals regrets to inform you that you've found a "known missing" page. We know this page should exist, but unfortunately we failed to capture it while we were collecting this manual. There's nothing we can do to restore this page. Go back to the list of cars and see if we have a different manual available for your car (if it's 1982-2013, we probably do), or else take a look at similar vehicles or maybe a different year and hopefully the data will be similar.

scio me nihil scire