Installation [06/2018 - 08/2021]: Procedure

INSTALL TRIP SWITCH

Engage the guide and 2 claws as shown in the illustration to install the trip switch.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
See step 2
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
Refer to PROCEDURE - Step 18
INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 22
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Headup Display)
Refer to PROCEDURE - Step 23
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Headup Display)
Refer to PROCEDURE - Step 24
INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING
Refer to PROCEDURE - Step 25
INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 28
INSTALL INSTRUMENT SIDE PANEL RH
Refer to PROCEDURE - Step 32
INSTALL FRONT DOOR OPENING TRIM COVER RH
HINT:

Use the same procedure as for the LH side.
INSTALL COWL SIDE TRIM BOARD RH
HINT:

Use the same procedure as for the LH side.
INSTALL FRONT DOOR SCUFF PLATE RH
HINT:

Use the same procedure as for the LH side.
INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING
Refer to PROCEDURE - Step 38
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 39
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 40
INSTALL INSTRUMENT SIDE PANEL LH
Refer to PROCEDURE - Step 41
INSTALL FRONT DOOR OPENING TRIM COVER LH
Refer to PROCEDURE - Step 31
INSTALL COWL SIDE TRIM BOARD LH
Refer to PROCEDURE - Step 32
INSTALL FRONT DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 33