LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> RX 500h >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System - Diagnostics - Introduction >> Meter / Gauge System >> Customize Parameters [10/2022 - 08/2023] >> Customize Parameters [10/2022 - 08/2023]

Customize Parameters [10/2022 - 08/2023]

  1. CUSTOMIZE METER / GAUGE SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the GTS
      1. Select the setting by referring to the table below.

        HINT: 

        Depending on the specifications of the vehicle, some items may not be displayed.

        Warning 

        Tester Display Description Default Setting ECU
        Lane Change Flashing Times Adjust Function to change the lane change flashing times. 3 $00:OFF,$01:3,$02:4,$03:5,$04:6,$05:7 Combination meter assembly
        Flasher Sound Volume Adjust Function to change the turn signal flasher buzzer sound volume Medium $02:Large,$00:Medium,$01:Small Combination meter assembly
        Proposal Services Function Function to change the suggestion function display setting ON $00:OFF,$01:Parked,$03:ON Main body ECU (Multiplex network body ECU)

        Display 

        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Adjust Function to change the trip result display time after the ignition switch is turned off 30s $00:30s,$01:60s,$02:600s,$03:OFF Combination meter assembly
        Projection Adjustment (Keystone) Headup display image calibration
        (Keystone calibration)        		 Default $03:Narrow Top (+3),$02:Narrow Top (+2),$01:Narrow Top (+1),$00:Default,$FF:Narrow Bottom (-1),$FE:Narrow Bottom (-2),$FD:Narrow Bottom (-3) Combination meter assembly
        Projection Adjustment (Distortion) Headup display image calibration
        (Distortion calibration)        		 Default $03:Convex (+3),$02:Convex (+2),$01:Convex (+1),$00:Default,$FF:Concave (-1),$FE:Concave (-2),$FD:Concave (-3) Combination meter assembly
        Audio Information Display Function Headup display (audio information display) setting OFF $00:OFF,$01:ON Combination meter assembly
        Master Caution Display Function Headup display (master warning and information display) setting ON $00:OFF,$01:ON Combination meter assembly
        Speed Limit Display Function Headup display (speed limit display for navigation system-linked) setting ON $00:OFF,$01:ON Combination meter assembly
        Memory Call Link Function Headup display (memory call-linked) setting OFF $00:OFF,$01:ON Combination meter assembly
        Seat Switch Link Function Headup display (power seat switch-linked) setting OFF $00:OFF,$01:ON Combination meter assembly
        Multi Switch Sensitivity Adjust Sensitivity setting for touch surface of the steering pad switch (w/ Touch Tracer Operation) Normal $00:Normal,$01:High,$02:OFF Combination meter assembly
        Multi Switch Timeout Adjust Popup time setting of the steering pad switch (w/ Touch Tracer Operation) operation guide display Normal $00:Normal,$01:Short,$02:Long Combination meter assembly
    2. Customizing with the Multi-display
      1. Enter the following menus:
        1. Settings (icon) / Vehicle customize
      2. Select the setting by referring to the table below.

        HINT: 

        Depending on the specifications of the vehicle, some items may not be displayed.

        METER (EXCEPT GASOLINE MODEL)

        Item Description Default Setting
        Meter type Meter indication layout setting Type 1
        • Type 1
        • Type 2
        • Type 3
        Tachometer Tachometer display area setting Auto switching
        • Auto switching
        • Tachometer
        • HEV meter
        EV indicator EV driving indicator light display setting ON
        • ON
        • OFF
        REV indicator REV indicator display setting ON
        • ON
        • OFF
        REV setting Settings of set value of REV indicator
        • T24A-FTS for 1Motor-HEV Model

          5000

        • for HEV Model

          4000

        		 Lower limit: 
        1. 2000

        Upper limit: 
        • T24A-FTS for 1Motor-HEV Model

          6200

        • for HEV Model

          6000
        REV peak REV peak hold display setting ON
        • ON
        • OFF
        Display switching Multi-information display (display contents) setting - -
        METER (FOR GASOLINE MODEL)

        Item Description Default Setting
        Meter type Meter indication layout setting Type 1
        • Type 1
        • Type 2
        • Type 3
        Eco indicator Eco driving indicator light display setting ON
        • ON
        • OFF
        REV indicator REV indicator display setting ON
        • ON
        • OFF
        REV setting Settings of set value of REV indicator 5000 Lower limit: 
        1. 2000

        Upper limit: 
        1. 6200
        REV peak REV peak hold display setting ON
        • ON
        • OFF
        Display switching Multi-information display (display contents) setting - -
        UTILITY

        Item Description Default Setting
        Vehicle suggestions Function to change the suggestion function display setting ON
        • ON
        • While stopped
        • OFF
        Scheduled maintenance Scheduled maintenance required reminder data reset - -
        Oil maintenance Engine oil maintenance required reminder data reset - -
        STEERING SWITCH/LEFT SIDE (W/ TOUCH TRACER OPERATION)

        Item Description Default Setting
        Layout Function allocation settings of the steering pad switch with touch detection function LH
        (Category setting)        		 Audio
        • Audio
        • Climate
        • Custom*
        1. *: When "Custom" is selected, function allocation settings of each switch position can be selected from items in the following table.
          Category Item Description
          Audio MODE Audio system mode change
          PWR Audio system ON/OFF
          SEEK/TRACK Playlist change
          Climate Temperature Air conditioning temperature change
          Air outlet mode Air outlet mode change
          Recirculation Recirculation change
          AUTO Auto air conditioning ON/OFF
          FAN Off Blower OFF
          FAN Blower level change
          A/C Air conditioning ON/OFF
        STEERING SWITCH/RIGHT SIDE (W/ TOUCH TRACER OPERATION)

        Item Description Default Setting
        Layout Function allocation settings of the steering pad switch with touch detection function RH
        (Category setting)        		 Display control
        • Display control
        • Custom*
        1. *: When "Custom" is selected, function allocation settings of each switch position can be selected from items in the following table.
          Category Item Description
          HUD Position Display position (up/down) change
          Brightness Display brightness change
          ON/OFF Headup display ON/OFF
          MODE Display layout change
          Meter DISP Display contents change
          Drive Mode SPORT Drive Mode change
          NORMAL Drive Mode change
          CUSTOM Drive Mode change
          ECO Drive Mode change
          Others Stop and Start*1 Stop and start system ON/OFF
          Panoramic View Monitor*2 Panoramic view monitor system ON/OFF
          1. *1: w/ Stop and Start System
          2. *2: w/ Panoramic View Monitor System
        STEERING SWITCH/OPTIONS (W/ TOUCH TRACER OPERATION)

        Item Description Default Setting
        Winter gloves mode Settings of the touch detection function when wearing gloves OFF
        • ON
        • OFF
scientia non olet · About LEMON Manuals