LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> RX 350h Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Control System - Service Information) >> ACTIVE CONTROL ENGINE MOUNT (for Rear Side) >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2025 Lexus RX 500h, 2025 Lexus RX 350, 2024 Lexus RX 500h, 2024 Lexus RX 350, and 2023 Lexus RX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FRAME ASSEMBLY 

    Refer to REMOVAL [10/2022 - ]

  2. REMOVE REAR ENGINE MOUNTING INSULATOR 
    1. GTY1131912Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD *B for AWD
  3. REMOVE WIRE HARNESS CLAMP BRACKET 
    1. GTY1132504Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD *B for AWD
  4. DISCONNECT VACUUM HOSE 
    1. GTY1133305Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD *B for AWD
scientia non olet · About LEMON Manuals