LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> RX 350h Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Emission Control System - Service Information) >> VACUUM REGULATING VALVE (for Gasoline Model) >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2025 Lexus RX 500h, 2025 Lexus RX 350, 2024 Lexus RX 500h, 2024 Lexus RX 350, and 2023 Lexus RX 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL VACUUM REGULATING VALVE ASSEMBLY 
    1. GTY1133048Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Vacuum Transmitting Hose Assembly *2 Vacuum Regulating Valve Assembly
      *3 No. 2 Vacuum Transmitting Hose Assembly - -
      *a 0 to 1 mm (0 to 0.0393 in.) - -
      1. Connect the vacuum transmitting hose assembly and No. 2 vacuum transmitting hose to the vacuum regulating valve.
        NOTE:
        • Make sure to slide the vacuum transmitting hose assembly until it contacts the hose stopper of the vacuum regulating valve assembly.
        • Make sure the tip of the hose is within the area shown in the figure.

        Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

scientia non olet · About LEMON Manuals