LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> RX 350h Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake / Exhaust System - Service Information >> Exhaust Pipe >> Removal [10/2022 - 08/2023] >> Procedure

Removal [10/2022 - 08/2023]: Procedure

  1. REMOVE TAIL EXHAUST PIPE ASSEMBLY 
    WARNING:
    • To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.
    1. GTY1129968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE AIR FUEL RATIO SENSOR (for Sensor 2) 

    Refer to REMOVAL [10/2022 - 08/2023]

  3. DRAIN ENGINE COOLANT (for Engine) 

    Refer to PROCEDURE - Step 4

  4. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst) 
    WARNING:
    • To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.
    1. GTY1132227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY1129826Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals