Removal [11/2021 - ]: Procedure

Refer to PROCEDURE - Step 1

Refer to PROCEDURE - Step 2

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Fastener	-	-
   	Direction to defeat		Remove in this Direction

   1. Fold the rear seatback assembly RH forward.
   2. Disengage the 3 clips.
   3. Disengage the 2 fasteners.
   4. Remove the 2 bolts.
   5. Disengage the 2 guides and shift the rear seatback assembly RH.
      NOTE:

      Be careful not to damage the vehicle body.

2. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Band

   -

   -

   1. Remove the nut and disconnect the floor anchor of the rear center seat outer belt assembly.
   2. Remove the floor anchor part of the rear center seat outer belt assembly from the band of the rear seatback assembly RH.
   3. Remove the rear seatback assembly RH.
      NOTE:

      Be careful not to damage the vehicle body.

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Fastener	-	-
   	Direction to defeat		Remove in this Direction

   1. Fold the rear seatback assembly LH forward.
   2. Disengage the 2 clips.
   3. Disengage the 2 fasteners.
   4. Remove the 2 bolts.
   5. Disengage the 2 guides and remove the rear seatback assembly LH.
      NOTE:

      Be careful not to damage the vehicle body.

1. for Gasoline Model:

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Rear Seat Cushion Frame Hook (Front Side)	*b	Rear Seat Cushion Frame Hook (Rear Side)
   	Place Hand Here		Remove in this Direction (1)
   	Remove in this Direction (2)	-	-

   1. Lift the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly from the rear seat cushion lock hooks.

      Standard Measurement

      Area	Measurement	Area	Measurement
      A	30 mm (1.18 in.)	B	60 mm (2.36 in.)
      C	80 mm (3.15 in.)	D	20 mm (0.787 in.)

      NOTE:

      • Disengage each hook at the front part of the rear seat cushion frame one area at a time.
      • Be sure to hold the parts of the seat cushion assembly directly next to the rear seat cushion frame hooks when lifting it. Lifting a different part of the cushion may deform the rear seat cushion frame.
   2. Disengage the 2 rear seat cushion frame hooks on the rear side of the rear seat cushion assembly as shown in the illustration and remove the rear seat cushion assembly.
      NOTE:

      Be careful not to damage the vehicle body.

2. for HEV Model:

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Rear Seat Cushion Frame Hook (Front Side)	*b	Rear Seat Cushion Frame Hook (Rear Side)
   	Place Hand Here		Remove in this Direction (1)
   	Remove in this Direction (2)	-	-

   1. Lift the front edge of the rear seat cushion assembly as shown in the illustration and disengage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly from the rear seat cushion lock hooks.

      Standard Measurement

      Area	Measurement	Area	Measurement
      A	30 mm (1.18 in.)	B	60 mm (2.36 in.)
      C	80 mm (3.15 in.)	D	150 mm (5.91 in.)

      NOTE:

      • Disengage each hook at the front part of the rear seat cushion frame one area at a time.
      • Be sure to hold the parts of the seat cushion assembly directly next to the rear seat cushion frame hooks when lifting it. Lifting a different part of the cushion may deform the rear seat cushion frame.
   2. Disengage the 2 rear seat cushion frame hooks on the rear side of the rear seat cushion assembly as shown in the illustration and remove the rear seat cushion assembly.
      NOTE:

      Be careful not to damage the vehicle body.

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *A

   for RH Side

   *B

   for LH Side