DTC P1366-29: "E" Camshaft Position Actuator Bank 1 Signal Invalid [03/2022 - 03/2023]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0010-01.

Refer to DTC P0010-01: Camshaft Position "A" Actuator Bank 1 General Electrical Failure [03/2022 - ]

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Note
P1366-29	"E" Camshaft Position Actuator Bank 1 Signal Invalid	Malfunction in diagnostic signal (VTM) of cam timing control motor with EDU assembly is detected for 3 seconds (1 trip detection logic).	Cam timing control motor with EDU assembly Open or short in cam timing control motor with EDU assembly circuit ECM	Comes on	SAE Code: P1366 DTC for Mexico Models: Applies