LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine Control System - Diagnostic Codes (P0010-P0069)) >> SFI System >> DTC P0014-00: Camshaft Position "B" - Timing Over-Advanced or System Performance Bank 1; DTC P0015-00: Camshaft Position "B" - Timing Over-Retarded Bank 1 [03/2022 - ] >> Description

DTC P0014-00: Camshaft Position "B" - Timing Over-Advanced or System Performance Bank 1; DTC P0015-00: Camshaft Position "B" - Timing Over-Retarded Bank 1 [03/2022 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0013-13.

Refer to DTC P0013-13: Camshaft Position "B" - Actuator Bank 1 Circuit Open [03/2022 - 03/2023] , or refer to DTC P0013-13: Camshaft Position "B" - Actuator Bank 1 Circuit Open [03/2023 - ] 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
P0014-00 Camshaft Position "B" - Timing Over-Advanced or System Performance Bank 1 Exhaust valve timing is stuck at a certain value when in the advance range (2 trip detection logic).
  • Valve timing
  • Cam timing oil control solenoid assembly
  • Camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly)
  • Camshaft timing exhaust gear assembly
  • ECM
Comes on
  • SAE Code: P0014
  • DTC for Mexico Models: Applies
P0015-00 Camshaft Position "B" - Timing Over-Retarded Bank 1 Exhaust valve timing is stuck at a certain value when in the retard range (1 trip detection logic).
  • Valve timing
  • Cam timing oil control solenoid assembly
  • Camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly)
  • Camshaft timing exhaust gear assembly
  • ECM
Comes on
  • SAE Code: P0015
  • DTC for Mexico Models: Applies