All Readiness [11/2021 - ]
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
- ALL READINESS
HINT:
- With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.
- You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.
- Turn the ignition switch off.
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON
- Turn the GTS on.
- Clear the DTCs even if no DTCs are stored. Enter the following menus: Chassis / Brake Booster / Trouble Codes.
Chassis > Brake Booster > Clear DTCs
- Clear the DTCs even if no DTCs are stored. Enter the following menus: Chassis / Brake/EPB* / Trouble Codes.
*: Electric Parking Brake System
Chassis > Brake/EPB > Clear DTCs
- Press the clear button.
- Turn the ignition switch off.
- Turn the ignition switch to ON (READY).
- Perform the DTC judgment driving pattern to run the DTC judgment.
- Enter the following menus: Chassis / Brake Booster / Utility / All Readiness.
Chassis > Brake Booster > Utility
Tester Display All Readiness - Enter the following menus: Chassis / Brake/EPB* / Utility / All Readiness.
*: Electric Parking Brake System
Chassis > Brake/EPB > Utility
Tester Display All Readiness - Input the DTC to be confirmed.
- Check the DTC judgment result.
GTS Display Description Normal - DTC judgment completed
- System normal
Abnormal - DTC judgment completed
- System abnormal
Incomplete - DTC judgment not completed
- Perform the driving pattern
N/A - Unable to perform DTC judgment
- Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit
- Perform the driving pattern
If the judgment result shows Incomplete or N/A, perform the DTC confirmation driving pattern again.