LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Electronically Controlled Brake System - Diagnostic Codes (4 Of 6)) >> Electronically Controlled Brake System (For Hev Model) >> Dtc C1345-00: Linear Solenoid Valve Offset Learning [11/2021 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

After Any Of The Following Situations, If The Learning Value Of The Linear Solenoid (Sla) Or Linear Solenoid (Slr) Is Not Stored And The Vehicle Is Being Driven At A Certain Speed Or More, The No. 2 Skid Control ECU (Brake Actuator Assembly) Judges That The Offset Learning Of The Linear Solenoid Valve Is Not Performed And Illuminates The Mil And Stores This Dtc.

  1. The No. 1 Skid Control ECU (Brake Booster With Master Cylinder Assembly) Has Been Replaced With A New One.
  2. After The Brake Pedal Stroke Sensor Assembly, Brake Pedal, Brake Booster With Master Cylinder Assembly, Brake Actuator Assembly Or Yaw Rate And Acceleration Sensor (Airbag Sensor Assembly) Has Been Removed And Installed Or Replaced, The Zero Point Is Cleared.
scientia non olet · About LEMON Manuals