Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| Both of the following conditions are met | - |
| Hybrid control module judge | Engine running |
| Lost communication with hybrid vehicle control ECU assembly (U0293) | Not detected |
P0335 (CASE 1)
| All of the following conditions are met | - |
| Auxiliary battery voltage | Higher than 6 V |
| Crankshaft position sensor voltage | 0.3 to 4.7 V |
| Ignition switch | On |
P0335 (CASE 2)
| All of the following conditions are met | - |
| Auxiliary battery voltage | Higher than 6 V |
| Crankshaft position sensor voltage | 0.3 to 4.7 V |
| Starter | Off |
| Engine speed (Top dead center) | 600 rpm or higher |
| Engine speed (30°CA) | 600 rpm or higher |