LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine Control System - Diagnostic Codes (P0340-P043E)) >> SFI System >> DTC P0365-2A: Camshaft Position Sensor "B" Bank 1 Signal Stuck in Range; DTC P0365-31: Camshaft Position Sensor "B" Bank 1 No Signal [11/2021 - 03/2022] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
All of the following conditions are met -
Engine speed 600 rpm or higher
Exhaust camshaft position sensor range check fail (P0367, P0368) Not detected
Ignition switch ON
Auxiliary battery voltage 8 V or higher
Exhaust camshaft position sensor voltage 0.3 to 4.7 V
Hybrid control module judge Engine running
Lost communication with hybrid vehicle control ECU assembly (U0293) Not detected