DTC P0365-2A: Camshaft Position Sensor "B" Bank 1 Signal Stuck in Range; DTC P0365-31: Camshaft Position Sensor "B" Bank 1 No Signal [03/2023 - 03/2024]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0365-11.

Refer to DTC P0365-11: Camshaft Position Sensor "B" Bank 1 Circuit Short to Ground; DTC P0365-15: Camshaft Position Sensor "B" Bank 1 Circuit Short to Battery or Open [03/2023 - 03/2024]

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Note
P0365-2A	Camshaft Position Sensor "B" Bank 1 Signal Stuck in Range	No camshaft position sensor (for exhaust camshaft) signal to ECM while engine cranking (1 trip detection logic).	Open or short in camshaft position sensor (for exhaust camshaft) circuit Camshaft position sensor (for exhaust camshaft) Exhaust camshaft ECM	Comes on	SAE Code: P0365 DTC for Mexico Models: Applies
P0365-31	Camshaft Position Sensor "B" Bank 1 No Signal	No camshaft position sensor (for exhaust camshaft) signal for 5 seconds at an engine speed of 600 rpm or higher (1 trip detection logic).	Open or short in camshaft position sensor (for exhaust camshaft) circuit Camshaft position sensor (for exhaust camshaft) Exhaust camshaft ECM	Comes on	SAE Code: P0365 DTC for Mexico Models: Applies

Reference: Inspection using an oscilloscope.

Refer to DTC P0340-11: Camshaft Position Sensor "A" Bank 1 or Single Sensor Circuit Short to Ground; DTC P0340-15: Camshaft Position Sensor "A" Bank 1 or Single Sensor Circuit Short to Battery or Open [03/2023 - 03/2024]