LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Electronically Controlled Brake System - Diagnostic Codes (5 Of 6)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC C1451-51: High Pressure Tube Air Bleeding Not Programmed [11/2021 - ] >> Procedure

DTC C1451-51: High Pressure Tube Air Bleeding Not Programmed [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM AIR BLEEDING 
    1. Bleed the air from the brake system.

      Refer to BLEEDING [11/2021 - ]

      HINT: 

      If air bleeding has been performed, this DTC will be cleared.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  2

  2. RECONFIRM DTC 
    1. Based on the Freeze Frame Data and interview with the customer, attempt to reproduce the conditions when the malfunction occurred.
    2. Check if the same DTC is output.

      Chassis > Brake Booster > Trouble Codes 

      Result

      Result Proceed to
      DTC C1451-51 is not output. A
      DTC C1451-51 is output. B

    Result: 

    END 

    Result: 

    PERFORM AIR BLEEDING AGAIN. Refer to  BLEEDING [11/2021 - ]