LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Electronically Controlled Brake System - Diagnostic Codes (5 Of 6)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC C141C-49: Brake Booster Motor "A" Control Internal Electronic Failure [11/2021 - ] >> Description

DTC C141C-49: Brake Booster Motor "A" Control Internal Electronic Failure [11/2021 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC C0594-00.

Refer to DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC Output from Note
C141C-49 Brake Booster Motor "A" Control Internal Electronic Failure Either of the following is detected:
  • When the voltage at terminal +BI1 is between 7.3 and 16.6 V, overcurrent is detected in the motor relay for 0.054 seconds or more.
  • Overcurrent is detected in the motor fail-safe relay for 0.054 seconds or more.
No. 1 skid control ECU (brake booster with master cylinder assembly) Comes on Brake/EPB
  • SAE Code: C141C
  • Output ECU: Both skid control ECUs