LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Electronically Controlled Brake System - Diagnostic Codes (5 Of 6)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC C13DA-09: Brake Pressure Too High (Brake Booster) Component Failure [11/2021 - ] >> Monitor Strategy

Monitor Strategy

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
Related DTCs C13DA: Brake pressure control solenoid pressure too high
Required Sensors/Components (Main) No. 2 skid control ECU (brake actuator assembly)
Brake actuator (brake booster with master cylinder assembly)
Required Sensors/Components (Related) Speed sensor
Stop light switch assembly
No. 2 skid control ECU (brake actuator assembly)
Brake actuator (brake booster with master cylinder assembly)
Frequency of Operation Continuous
Duration 0.36 seconds: Case 1-2, 1-3 and 1-4
0.54 seconds: Case 1-1
MIL Operation Immediately
Sequence of Operation None
scientia non olet · About LEMON Manuals