LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Electronically Controlled Brake System - Diagnostic Codes (5 Of 6)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC C13D9-09: Brake Pressure Too Low (Brake Booster) Component Failure; DTC C14EC-00: Brake Pressure Control solenoid "C" [11/2021 - ] >> Component Operating Range

Component Operating Range

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
C13D9

All of the following conditions are met -
Servo pressure sensor fail Not detected
Brake-by-wire controlled mode On
Brake On
Servo pressure 0.5 MPa (5.1 kgf/cm2 , 73 psi) or more
Malfunction criteria Not met
C14EE

All of the following conditions are met -
Servo pressure sensor fail Not detected
Brake-by-wire controlled mode On
Brake On
Servo pressure Higher than 0.1 MPa (1 kgf/cm2 , 15 psi)