LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Electronically Controlled Brake System - Diagnostic Codes (6 Of 6), Symptom Tests & Circuit Tests) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC U0110-00: Lost Communication with Drive Motor Control Module "A"; DTC U0129-87: Lost Communication with Brake System Control Module "A" Missing Message; DTC U0293-00: Lost Communication with Hybrid/EV Powertrain Control Module; DTC U1106-00: Lost Communication with Electric Parking Brake Module; DTC U1150-00: Lost Communication with Hybrid Powertrain Control Module (ch2); DTC U117D-87: Lost Communication with Brake System Control Module (ch4) Missing Message; DTC U1492-57: Software incompatibility with Hybrid/EV Powertrain Control Module Invalid/Incompatible Software Component [11/2021 - ] >> Monitor Strategy

Monitor Strategy

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
Related DTCs U0110 (Case 2): Lost communication with drive motor control module "A"
U0129: Lost communication with ECB*_ECU (C1-Bus)
U0293 (Case 2): Lost communication with HEV (C1-Bus)
U1150 (Case 2): Lost communication with HEV (PL-Bus)
U117D: Lost communication with ECB*_ECU (PL-Bus)
Required Sensors/Components (Main) No. 2 skid control ECU (brake actuator assembly)
Required Sensors/Components (Related) No. 2 skid control ECU (brake actuator assembly)
Frequency of Operation Continuous
Duration 2 seconds
MIL Operation Immediately
Sequence of Operation None

*: Electronically Controlled Brake System