LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Electronically Controlled Brake System - Diagnostic Codes (6 Of 6), Symptom Tests & Circuit Tests) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC P2530-00: Ignition Switch Run Position Malfunction [11/2021 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
Monitor runs whenever the following DTCs are not stored C1021 (Case 1): Brake system voltage input out of range low
All of the following conditions are met -
IGR voltage 3.8 V or more
Communication status with hybrid control system Valid
IGP PT2 (CAN data) On
scientia non olet · About LEMON Manuals