LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Electronically Controlled Brake System - Diagnostic Codes (6 Of 6), Symptom Tests & Circuit Tests) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC P05FF-62: Brake Pressure Sensor / Brake Pedal Position Sensor Signal Compare Failure [11/2021 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

The No. 2 skid control ECU (brake actuator assembly) monitors the ratio of output value of the brake pedal stroke sensor assembly and reaction force pressure sensor.

When in linear mode (switching solenoid (SSA) on), the brake pedal is being operated and the ratio of the output value of the brake pedal stroke sensor assembly and reaction force pressure sensor is outside the normal range, the No. 2 skid control ECU (brake actuator assembly) judges that the ratio of the output value of the brake pedal stroke sensor assembly and reaction force pressure sensor is abnormal and illuminates the MIL and stores this DTC.

scientia non olet · About LEMON Manuals