LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Electronically Controlled Brake System - Diagnostic Codes (6 Of 6), Symptom Tests & Circuit Tests) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC P05DB-00: Brake Pedal Position Sensor "B"; DTC P05E0-00: Brake Pedal Position Sensor "A"/"B" [11/2021 - 03/2024] >> Component Operating Range

Component Operating Range

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
P05DB

All of the following conditions are met -
Brake system voltage (VM1) Higher than 6.92 V
+BS voltage Higher than 8.5 V
Up / downstream communication Valid
Brake pedal position sensor state fix Valid
P05E0

All of the following conditions are met -
Brake system voltage (VM1) Higher than 6.92 V
+BS voltage Higher than 8.5 V
Up / downstream communication Valid
Brake pedal position sensor on experience (Low/Mid/High) On