DTC P0571-13: Brake Switch "A" Circuit Open [11/2021 - ]: Description
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
The No. 2 skid control ECU (brake actuator assembly) detects the brake operating conditions through a signal transmitted by the stop light switch assembly.
The No. 2 skid control ECU (brake actuator assembly) incorporates a circuit to detect an open circuit.
This DTC is output when an open circuit is detected in the stop light signal input line.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | DTC Output from | Note |
|---|---|---|---|---|---|---|
| P0571-13 | Brake Switch "A" Circuit Open | When the voltage at terminal +BS is 9.5 V or more and the stop light drive output (STPO) is off, an open in the STP circuit is detected for 0.3 seconds or more. |
|
Does not come on | Brake/EPB | Output ECU: No. 2 skid control ECU (brake actuator assembly) |