LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Motor Generator Control System - Diagnostic Codes (3 Of 5)) >> Motor Generator Control System >> DTC P0A94-9E: DC/DC Converter Stuck On; DTC P0D33-19: DC/DC Converter Circuit Current Above Threshold [11/2021 - ] >> Description

DTC P0A94-9E: DC/DC Converter Stuck On; DTC P0D33-19: DC/DC Converter Circuit Current Above Threshold [11/2021 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.

For a description of the boost converter.

Refer to DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P0A94-9E DC/DC Converter Stuck On Boost converter fail signal detected (circuit malfunction)
(1 trip detection logic)
  • Inverter cooling system
  • Cooling fan system
  • Wire harness or connector
  • Motor cable
  • HV floor under wire (rear traction motor cable)
  • Hybrid vehicle transaxle assembly
  • Rear traction motor with transaxle assembly
  • PCU fuse
  • Inverter with converter assembly
  • Hybrid vehicle control ECU
Comes on Master Warning:
Comes on
P0D33-19 DC/DC Converter Circuit Current Above Threshold Boost converter fail signal detected:
A malfunction is detected in any of the boost converter components (inverter, hybrid vehicle transaxle, motor generator control ECU, etc.).
(1 trip detection logic)
  • Inverter cooling system
  • Cooling fan system
  • Wire harness or connector
  • Motor cable
  • HV floor under wire (rear traction motor cable)
  • Hybrid vehicle transaxle assembly
  • Rear traction motor with transaxle assembly
  • PCU fuse
  • Inverter with converter assembly
  • Hybrid vehicle control ECU
Comes on Master Warning:
Comes on