DTC P2E00-64: Gear Lever Position Sensor "A" Signal Plausibility Failure; DTC P2E04-64: Gear Lever Position Sensor "B" Signal Plausibility Failure; DTC P2E08-64: Gear Lever Position Sensor "C" Signal Plausibility Failure [11/2021 - ]: Description
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
The shift control ECU and 3 shift sensors are built into the transmission floor shift assembly. The shift control ECU monitors the angle information of the shift sensors and power supply voltage for sensors.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P2E00-64 | Gear Lever Position Sensor "A" Signal Plausibility Failure | When the auxiliary battery voltage is a certain value or more, any of the following is met:
(1 trip detection logic) |
Transmission floor shift assembly (shift control ECU) | Does not come on | Multi-information Display Error Message
|
Hybrid Control | A | SAE: P2E01 |
| P2E04-64 | Gear Lever Position Sensor "B" Signal Plausibility Failure | When the auxiliary battery voltage is a certain value or more, any of the following is met:
(1 trip detection logic) |
Transmission floor shift assembly (shift control ECU) | Does not come on | Multi-information Display Error Message
|
Hybrid Control | A | SAE: P2E05 |
| P2E08-64 | Gear Lever Position Sensor "C" Signal Plausibility Failure | When the auxiliary battery voltage is a certain value or more, any of the following is met:
(1 trip detection logic) |
Transmission floor shift assembly (shift control ECU) | Does not come on | Multi-information Display Error Message
|
Hybrid Control | A | SAE: P2E09 |