Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| Monitor runs whenever the following DTCs are not stored | None |
| All of the following conditions are met | - |
| Battery voltage | 8 V or higher |
| Ignition switch | ON |
| Starter | Off |
| Solenoid current cut status | Not cut |
| Either of the following conditions is met | 1 or 2 |
| 1. Both of the following conditions are met | - |
| Battery voltage | 12 V or higher |
| Target current | 0.6 A or higher, and less than 0.85 A |
| 2. Both of the following conditions are met | - |
| Battery voltage | 10 V or higher, and less than 12 V |
| Target current | 0.6 A or higher, and less than 0.7 A |
CASE 1
| Either of the following conditions is met | 1 or 2 |
| 1. Both of the following conditions are met | - |
| Battery voltage | 12 V or higher |
| Target current | Less than 0.65 A |
| 2. Both of the following conditions are met | - |
| Battery voltage | 10 V or higher, and less than 12 V |
| Target current | Less than 0.55 A |
CASE 2
| Target current | 0.15 A or higher |