Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| Monitor runs whenever the following DTCs are not stored |
None |
| All of the following conditions are met |
- |
| Battery voltage |
8 V or higher |
| Ignition switch |
ON |
| Starter |
Off |
| Solenoid current cut status |
Not cut |
CASE 1
| Target current |
0.2 A or more |
CASE 2
| Target current |
0.3 A or less |