Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
STUCK MONITOR
| All of the following conditions are met | - |
| Fuel pressure sensor (for high pressure side) circuit malfunction (P0192, P0193) | Not detected |
| High pressure fuel pump malfunction (P1235) | Not detected |
| Engine coolant temperature sensor malfunction (P0117, P0118) | Not detected |
| Barometric pressure sensor malfunction (P00CF, P106C, P2228, P2229) | Not detected |
| Battery voltage | 11 V or higher |
| Fuel cut | Off |
| Injection mode | NOT PFI (Port fuel injection) |
CORRELATION MONITOR WITH BAROMETRIC PRESSURE
| All of the following conditions are met | - |
| Fuel pressure sensor (for high pressure side) circuit malfunction (P0192, P0193) | Not detected |
| High pressure fuel pump malfunction (P1235) | Not detected |
| Engine coolant temperature sensor malfunction (P0117, P0118) | Not detected |
| Barometric pressure sensor malfunction (P00CF, P106C, P2228, P2229) | Not detected |
| Soak timer malfunction (P2610) | Not detected |
| Battery voltage | 8 V or higher |
| Ignition switch | Off |
| Soak time | 5, 7 or 9.5 hours |
| Atmospheric pressure | 76 kPa (abs) [11 psi (abs)] or higher |