LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Engine Control System - Diagnostic Codes (P0087-P012F)) >> SFI System >> DTC P0128-00: Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature); DTC P0128-07: Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature) Mechanical Failure [03/2023 - 03/2024] >> Procedure

DTC P0128-00: Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature); DTC P0128-07: Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature) Mechanical Failure [03/2023 - 03/2024]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0128-00 OR P0128-07) 
    1. Read the DTCs.

      Powertrain > Engine > Trouble Codes 

      Result

      Result Proceed to
      DTC P0128-00 or P0128-07 is output A
      DTC P0128-00 or P0128-07 and other DTCs are output B

      HINT: 

      If any DTCs other than P0128-00 or P0128-07 are output, troubleshoot those DTCs first.

    Result: 

    B 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [03/2023 - 03/2024] 

    Result: 

    A 

    See step  2

  2. CHECK ENGINE COOLING SYSTEM 
    1. Check for defects in the engine cooling system that might cause the system to be too cold, such as abnormal cooling fan operation or any modifications.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REPAIR OR REPLACE ENGINE COOLING SYSTEM 

    Result: 

    OK 

    See step  3

  3. INSPECT ENGINE COOLANT TEMPERATURE SENSOR (FOR CYLINDER HEAD SIDE) 
    1. Inspect the engine coolant temperature sensor (for cylinder head side).

      Refer to INSPECTION [11/2021 - ]

      HINT: 

      Perform "Inspection After Repair" after replacing the engine coolant temperature sensor (for cylinder head side).

      Refer to INITIALIZATION [11/2021 - ]

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REPLACE ENGINE COOLANT TEMPERATURE SENSOR (FOR CYLINDER HEAD SIDE). Refer to  REMOVAL [11/2021 - ] 

    Result: 

    OK 

    See step  4

  4. INSPECT ENGINE COOLANT TEMPERATURE SENSOR (FOR OUTLET SIDE) 
    1. Inspect the engine coolant temperature sensor (for outlet side).

      Refer to INSPECTION [11/2021 - ]

      HINT: 

      Perform "Inspection After Repair" after replacing the engine coolant temperature sensor (for outlet side).

      Refer to INITIALIZATION [11/2021 - ]

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REPLACE ENGINE COOLANT TEMPERATURE SENSOR (FOR OUTLET SIDE). Refer to  REMOVAL [11/2021 - ] 

    Result: 

    OK 

    See step  5

  5. CLEAR DTC 
    1. Clear the DTCs.

      Powertrain > Engine > Clear DTCs 

    2. Turn the ignition switch off and wait for at least 30 seconds.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  6

  6. CHECK WHETHER DTC OUTPUT RECURS (DTC P0128-00 OR P0128-07) 
    1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
    2. Read the DTCs.

      Powertrain > Engine > Trouble Codes 

      Result

      Result Proceed to
      DTCs are not output A
      DTC P0128-00 or P0128-07 is output B

    Result: 

    A 

    CHECK FOR INTERMITTENT PROBLEMS. Refer to  CHECK FOR INTERMITTENT PROBLEMS [11/2021 - ] 

    Result: 

    B 

    REPLACE WATER CONTROL VALVE. Refer to  REMOVAL [11/2021 - ]