LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Control System - Diagnostic Codes (P0010-P007A)) >> SFI System >> DTC P0011-00: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1; DTC P0012-00: Camshaft Position "A" - Timing Over-Retarded Bank 1 [03/2023 - 03/2024] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
ALL:

Monitor runs whenever the following DTCs are not stored P0010 (VVT oil control solenoid)
P0016 (VVT system - misalignment)
P0101, P0102, P0103 (Mass air flow meter)
P0107, P0108 (Manifold absolute pressure)
P0117, P0118 (Engine coolant temperature sensor)
P0335, P0337, P0338 (Crankshaft position sensor)
P0340, P0342, P0343 (Camshaft position sensor)
P0365, P0367, P0368 (Exhaust camshaft position sensor)
P0011: ADVANCED CAMSHAFT TIMING, P0012: RETARDED CAMSHAFT TIMING:

Battery voltage 11 V or higher
Engine speed 400 to 4000 rpm
Engine coolant temperature 75 to 100°C (167 to 212°F)
scientia non olet · About LEMON Manuals