LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> NX 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Electronically Controlled Brake System - Diagnostic Codes (2 Of 6)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HEV Model) >> DTC C0577-28: Brake Pressure Sensor "D" Signal Bias Level Out of Range / Zero Adjustment Failure [11/2021 - ] >> Component Operating Range

Component Operating Range

WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
All of the following conditions are met -
Brake position sensor circuit fail Not detected
Reaction force pressure sensor circuit fail Not detected
Brake Off
Reaction force pressure sensor -0.63 MPa (-6.4 kgf/cm2 , -91.4 psi) or more, and 1.53 MPa (15.6 kgf/cm2 , 222 psi) or less