DTC C0526-2A: Steering Angle Sensor Module Signal Stuck In Range [11/2021 - ]: Description
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
The No. 2 skid control ECU (brake actuator assembly) receives signals from the steering angle sensor via CAN communication.
HINT:
When a malfunction occurs in the communication line to the steering angle sensor, U0126-87 is output.
If a DTC related to the CAN communication line is output, first troubleshoot the CAN communication line.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | DTC Output from | Note |
|---|---|---|---|---|---|---|
| C0526-2A | Steering Angle Sensor Module Signal Stuck In Range | Normal communication between the No. 2 skid control ECU (brake actuator assembly) and the steering angle sensor and abnormal steering angle sensor zero point. |
|
Does not come on | Brake/EPB | Output ECU: No. 2 skid control ECU (brake actuator assembly) |