DTC P2614-01: Camshaft Position Signal Output "A" General Electrical Failure [11/2021 - 03/2022]: Description
WARNING: This page is about a different car, the 2025 Lexus NX 350h, 2024 Lexus NX 350h, 2023 Lexus NX 350h, and 2022 Lexus NX 350h. However, it is still accessible from the selected car via links, so may be relevant.
Refer to DTC P0010-01.
Refer to DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| P2614-01 | Camshaft Position Signal Output "A" General Electrical Failure | Malfunction in rotation sensor of cam timing control motor with EDU assembly is detected for 3 seconds (1 trip detection logic). |
|
Comes on | SAE Code: P2614 |
SYMPTOMS AND FAIL-SAFE OPERATION DURING CAMSHAFT CONTROL MOTOR MALFUNCTION
| Vehicle Condition | Fail-Safe |
|---|---|
|
The cam timing control motor with EDU assembly is operated to the most retarded position. |