LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> LS 500h >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (1 Of 2) >> Rear Upper Arm >> On-Vehicle Inspection [10/2017 - ] >> Procedure

On-Vehicle Inspection [10/2017 - ]: Procedure

  1. INSPECT REAR NO. 1 SUSPENSION ARM ASSEMBLY LH 
    1. Check for looseness.
      1. Lift up the vehicle.
      2. Move the rear No. 1 suspension arm assembly LH up and down then left and right by hand to check that there is no looseness at the rear No. 1 suspension arm assembly LH.
        GTY813291Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT REAR UPPER CONTROL ARM ASSEMBLY LH 
    1. Check for looseness.
      1. Lift up the vehicle.
      2. Move the rear upper control arm assembly LH up and down then left and right by hand to check that there is no looseness at the rear upper control arm assembly LH.
        GTY813292Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals