LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> LS 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Hybrid Transaxle System (L310) - Service Information (2 Of 2)) >> Shift Lever >> Removal [10/2017 - 10/2023] >> Procedure

Removal [10/2017 - 10/2023]: Procedure

WARNING: This page is about a different car, the 2022 Lexus LS 500h, 2021 Lexus LS 500h, 2020 Lexus LS 500h, 2019 Lexus LS 500h, and 2018 Lexus LS 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE CONSOLE BOX ASSEMBLY 

    Refer to REMOVAL [10/2017 - 10/2020] , or refer to REMOVAL [10/2020 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023]

  2. REMOVE NO. 1 CONSOLE BOX DUCT 
    1. Remove the 2 clips and No. 1 console box duct.
      GTY777726Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE SHIFT POSITION INDICATOR 

    HINT: 

    Perform this procedure only when replacing the shift position indicator.

    1. Remove the 2 screws, 2 claws and shift position indicator from the console upper panel assembly.
      GTY799676Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY 
    1. GTY832639Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Disconnect the 2 clamps.

    2. Disconnect the transmission floor shift assembly connector.
      GTY799314Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 4 bolts and transmission floor shift assembly from the body.
      GTY799690Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals