Installation [10/2017 - ]: Procedure

1. Connect the No. 1 actuator harness clamp with the 2 clamps.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Connect the No. 2 actuator harness clamp with the clamp.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the No. 1 cable support bracket in the direction indicated by the arrow shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the No. 2 cable support bracket in the direction indicated by the arrow shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the parking brake cable support bracket in the direction indicated by the arrow shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the parking brake actuator assembly with bracket with the 3 nuts.

   Torque: 27 N.m (275 kgf/cm, 20 ft.lbf) 

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. connect the 2 clamps to the rear suspension member sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Install the parking brake actuator assembly with bracket with the bolt and 6 nuts.

   Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to INSTALLATION [10/2017 - 09/2019] , or refer to INSTALLATION [09/2019 - 10/2020] , or refer to INSTALLATION [10/2020 - 10/2023] , or refer to INSTALLATION [10/2023 - ]