Typical Malfunction Thresholds
C13D9 (CASE 1-1)
| Both of the following conditions are met | - |
| Difference between target brake pressure and servo pressure | Higher than 2.7 to 4.14 MPa (27.5 to 42.2 kgf/cm2 , 392 to 601 psi) |
| Delay of servo pressure increase | Higher than 0.3 to 4.584 seconds |
C13D9 (CASE 1-2)
| Both of the following conditions are met | - |
| Difference between target brake pressure and servo pressure | Higher than 1.5 MPa (15.3 kgf/cm2 , 218 psi) |
| Delay of servo pressure increase | Higher than 0.3 to 4.584 seconds |
C14EE
| Servo pressure | 0.1 MPa (1 kgf/cm2 , 15 psi) or less |