LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> LS 500h >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System (W/ Advanced Park) - Diagnostic Codes (2 Of 5) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ Advanced Park) >> DTC C05C1-51: Brake Pedal Position Sensor "B" Not Programmed [11/2021 - 10/2023] >> Description

DTC C05C1-51: Brake Pedal Position Sensor "B" Not Programmed [11/2021 - 10/2023]: Description

Refer to DTC C05C1-00.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
C05C1-51 Brake Pedal Position Sensor "B" Not Programmed The brake pedal stroke sensor assembly zero point calibration is not performed.
(Normal brake pedal stroke sensor assembly zero point not memorized.)
  • Valid brake pedal stroke sensor assembly zero point not memorized.

    (Calibration not performed or not completed)

  • Wire harness and connector
  • Brake pedal stroke sensor assembly
 Does not come on Output ECU: No. 2 skid control ECU (brake actuator assembly)
HINT: 
During Dealer Mode, related DTCs are cleared.
scientia non olet · About LEMON Manuals