DTC C0526-2A: Steering Angle Sensor Module Signal Stuck In Range [11/2021 - 10/2023]: Description
The No. 2 skid control ECU (brake actuator assembly) receives signals from the steering sensor via CAN communication.
HINT:
When a malfunction occurs in the communication line to the steering sensor, U0126-87 is output.
If a DTC related to the CAN communication line is output, first troubleshoot the CAN communication line.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| C0526-2A | Steering Angle Sensor Module Signal Stuck In Range | Normal communication between the No. 2 skid control ECU (brake actuator assembly) and the steering sensor and abnormal steering sensor zero point. |
|
Does not come on | Output ECU: No. 2 skid control ECU (brake actuator assembly) |