Caution / Notice / Hint
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the windshield glass removal/installation are shown below.
NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED
| Replaced Part or Performed Procedures | Necessary Procedures | Effect/Inoperative Function when Necessary Procedures are not Performed | Link |
|---|---|---|---|
| Windshield glass (Including removal and installation) | Adjust forward recognition camera |
|
for Target Adjustment (One Time Recognition): Refer to TARGET ADJUSTMENT (ONE TIME RECOGNITION) [10/2023 - ] for Driving Adjustment: Refer to DRIVING ADJUSTMENT [10/2023 - ] for Target Adjustment (Flat Surface Target): Refer to CAMERA AXIS ADJUSTMENT VALUE WRITE [10/2023 - ] |
HINT:
- Use the same procedure for the RH and LH side.
- The following procedure is for the LH side.