LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> LC 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission System - Service Information (Coupe) (1 Of 2)) >> Shift Lever Knob >> Installation [03/2017 - ] >> Procedure

Installation [03/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Install the shift lever knob sub-assembly.
      GTY778748Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Threaded Portion
      *b Non-threaded Portion
      Turn
      1. Turn the shift knob sub-assembly until rotation becomes difficult.
        NOTE:

        When rotation becomes difficult, the shift lever assembly (shaft) has reached the non-threaded portion on the inside of the shift lever knob sub-assembly.

      2. From there, tighten by one turn.
      3. In addition, align shift lever knob sub-assembly to the front and rear direction of the vehicle.
scientia non olet · About LEMON Manuals