Removal [03/2017 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE FRONT DOOR TRIM COVER SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 4 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 4 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 4 [04/2020 - 05/2023] , or refer to DISASSEMBLY [05/2023 - ]
- REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 6 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 6 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 6 [04/2020 - 05/2023] , or refer to DISASSEMBLY [05/2023 - ]
- REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
- Detach the wire harness clamp.
- Remove the 5 screws and pull handle.
- Detach the wire harness clamp and disconnect the connector.
- Remove the 3 screws.
- Detach the claw and remove the multiplex network master switch assembly with switch base.
Using a thin-bladed screwdriver, detach the claw and remove the multiplex network master switch assembly from the switch base.
HINT:
Tape the thin-bladed screwdriver tip before use.
- Detach the wire harness clamp.