Installation [03/2017 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
- Attach the claw to install the multiplex network master switch assembly to the switch base.
- Attach the claw to install the multiplex network master switch assembly with switch base to the front door trim board sub-assembly.
- Install the 3 screws.
- Connect the connector and attach the wire harness clamp.
- Install the pull handle with the 5 screws.
- Attach the wire harness clamp.
- Attach the claw to install the multiplex network master switch assembly to the switch base.
- INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 39 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 39 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 39 [04/2020 - 05/2023] , or refer to REASSEMBLY [05/2023 - ]
- INSTALL FRONT DOOR TRIM COVER SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 41 [03/2017 - 06/2019] , or refer to REASSEMBLY [06/2019 - 04/2020] , or refer to PROCEDURE - Step 41 [04/2020 - 05/2023] , or refer to REASSEMBLY [05/2023 - ]
- INSPECT POWER WINDOW OPERATION
Refer to OPERATION CHECK [03/2017 - ]
- INSPECT DOOR LOCK OPERATION
Refer to OPERATION CHECK [03/2017 - ]