Installation [03/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY

Attach the claw to install the power window regulator switch assembly to the No. 2 switch base.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Attach the guide to install the No. 2 switch base to the No. 1 switch base.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install the 2 screws.

Install the No. 1 switch base as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Install in this Direction (1)
	Install in this Direction (2)

Install the screw of the face of the front door trim board sub-assembly RH.

Install the 7 screws of the backside of the front door trim board sub-assembly RH.

Connect the connector.

INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH
Refer to PROCEDURE - Step 43 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 43 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 43 [04/2020 - 05/2023] , or refer to REASSEMBLY [05/2023 - ]
INSTALL FRONT DOOR ASSIST GRIP ASSEMBLY RH
Refer to PROCEDURE - Step 45 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 45 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 45 [04/2020 - 05/2023] , or refer to REASSEMBLY [05/2023 - ]