Removal [03/2017 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE COURTESY LIGHT ASSEMBLY
- For LH Side:
- Apply protective tape around the courtesy light assembly.
- Insert moulding remover A between the courtesy light assembly and front door trim board from the front of the vehicle and detach the claw.
- Pull out the courtesy light assembly to detach the hook.
Remove in this Direction - - - Disconnect the connector.
- For RH Side:
- Apply protective tape around the courtesy light assembly.
- Insert moulding remover A between the courtesy light assembly and front door trim board from the rear of the vehicle and detach the claw.
- Pull out the courtesy light assembly to detach the hook.
Remove in this Direction - - - Disconnect the connector.
- For LH Side: